Wavotec Power Charger Technical Overview

1. GaN Technology Introduction

Gallium Nitride (GaN) is a next-generation semiconductor material replacing traditional silicon in fast chargers.

Wavotec GaN chargers adopt high-performance GaN chips, featuring higher power density, lower heat generation, smaller size and higher conversion efficiency.

This technology enables high-wattage fast charging in a compact portable form factor, ideal for travel, office and daily multi-device charging scenarios.

2. Power Rating / Charging Protocol Support

Wavotec power charger covers mainstream wattage options: 30W, 45W, 65W, 100W, 140W, 240W.

Fully compatible with industry standard fast charging protocols:

· USB PD 3.0 / PD 3.1

· QC 4.0 / QC 3.0

· SCP / FCP for Android devices

· Apple 2.4A charging protocol

Auto negotiation with connected devices to match the optimal voltage and current, realizing safe fast charge without damaging battery.

3. Hardware Protection / Safety Design

Wavotec chargers are built with full-range multiple protection circuits to ensure stable and safe operation:

· Over Voltage Protection (OVP)

· Over Current Protection (OCP)

· Short Circuit Protection (SCP)

· Over Temperature Protection (OTP)

· Surge / lightning protection

· Automatic recovery after abnormal state

4. Output Configuration / Compatibility

Wavotec offers multi-port layout chargers: Single USB-C, Dual-port Type-C+USB-A, and multi-port simultaneous output models.

Support simultaneous charging for laptop, smartphone, tablet and earphones at allocated power distribution.

Wide system / device compatibility: MacBook, Windows laptop, iPhone, Android smartphone, iPad, Switch and other USB-C powered devices.

5. Energy Efficiency / Thermal Performance

Wavotec chargers adopt high-efficiency LLC switching power supply architecture, with energy conversion efficiency up to 92%+.

Optimized internal heat dissipation layout and low-loss circuit design reduce idle power consumption and continuous working heat accumulation.

Low noise, low heating during long-term load, meet global energy saving and eco-design requirements.

Wavotec Power Charger Setup Guide

1. Preparations Before Use

Prepare GaN charger, charging cable and your device such as laptop, smartphone or tablet.

Make sure the power socket is stable, well-grounded and in a well-ventilated position.

2. Hardware Connection Steps

· Plug the power charger into a standard AC wall socket firmly.

· Connect USB-C / USB-A cable to the charger output port.

· Plug the other end of the cable into your laptop, phone or other USB-powered device.

3. Automatic Charging Operation

The charger will auto-detect your device and negotiate the best fast charging protocol automatically.

No driver or software installation required, plug and play for immediate charging.

4. Multi-Port Usage Note

For multi-port chargers, power will be allocated intelligently when multiple devices charge at the same time.

No manual setting needed, system keeps stable charging status automatically.

5. Quick Troubleshooting

· No charging: Re-plug the socket or change another USB cable.

· Slow charging: Confirm using high-quality cable and fast charge supported device.

· Warm during charging: Normal heat dissipation under high-power fast charging.

Wavotec Power Charger FAQ

1. What is GaN charging technology?

GaN (Gallium Nitride) is a new generation semiconductor material that replaces traditional silicon chips. It features smaller size, lower heat generation, higher power density and energy conversion efficiency, enabling high-wattage fast charging in a compact charger design.

2. Which fast charging protocols are supported?

Wavotec power chargers support mainstream protocols including USB PD 3.0/3.1, QC 3.0/4.0, SCP, FCP and Apple 2.4A, auto-matching optimal voltage and current for different devices.

3. Is it compatible with MacBook, iPhone and Android devices?

Yes. All models work perfectly with MacBook, Windows laptops, iPhone, iPad, Android smartphones, tablets, Switch and other USB-C powered devices.

4. Can multiple ports charge at full speed simultaneously?

Multi-port chargers adopt intelligent power allocation. When multiple devices are connected, power will be distributed automatically to ensure stable charging without overload.

5. Does the charger have overcharge and overheat protection?

Built-in full-protection circuits support Over Voltage, Over Current, Short Circuit, Over Temperature and surge protection, effectively preventing overheating, overcharging and battery damage.

6. Is the charger safe for long-term plug-in use?

Adopting flame-retardant housing and isolation insulation design, complied with international safety standards. It supports long-term standby and continuous charging with low idle power consumption.

7. Why does the charger get slightly warm during charging?

Slight heat generation is normal during high-power fast charging. Optimized thermal design ensures temperature stays within safe range and will not affect service life.

Wavotec Networking Solution Technical Overview

1. Networking Ecosystem Introduction

Wavotec Networking Solution integrates full-range wired and wireless networking devices, covering Mesh Router / WiFi Range Extender / Wireless Access Point / USB WiFi Adapter, and complete PoE series including PoE Switch, PoE Extender and PoE Adapter.

We deliver one-stop networking solutions for home whole-house coverage, enterprise office deployment, hotel campus networking and surveillance engineering, compatible with mainstream Windows and macOS systems.

2. Wireless WiFi Technology Architecture

Wavotec wireless devices support full generation WiFi standards including WiFi 5, WiFi 6, WiFi 6E and latest WiFi 7, covering 2.4GHz, 5GHz and 6GHz tri-band concurrent transmission.

· Seamless Mesh roaming for multi-node whole-home WiFi coverage

· Access Point mode for enterprise wall-mounted and ceiling deployment

· WiFi Extender expands original network coverage without replacing existing router

· High-gain antenna design for stable signal penetration and long-range transmission

3. USB WiFi Adapter Technology

Wavotec USB WiFi Adapter series adopts high-performance mainstream networking chip, supporting plug-and-play and driver-supported versions.

Fully adaptive to mainstream desktop and laptop systems, enabling stable high-speed wireless network upgrade and flexible network access expansion.

4. PoE Power / Data Transmission Technology

Wavotec PoE series follows standard PoE protocol, realizing simultaneous network data transmission and power supply over single Ethernet cable.

· PoE Switch: Centralized power supply and network distribution for multiple devices

· PoE Extender: Relay network and power supply for long-distance wiring

· PoE Adapter: Inject power for single AP, camera and low-power network terminal

· Simplify on-site wiring, reduce construction cost and improve network stability

5. Compatibility / Application Scenarios

All Wavotec networking products support cross-brand router compatibility and multi-system adaptation, stable for smart home, surveillance camera and daily office terminal connection.

Suitable for residential whole-house WiFi, commercial office networking, hotel / campus coverage, industrial monitoring and remote wired PoE deployment.

Wavotec Networking Solution Setup Guide

1. Preparations Before Installation

Prepare WiFi Router / Access Point / USB WiFi Adapter / PoE device and standard network cables.

Place networking equipment in an open area, away from heavy obstacles and signal interference.

2. Basic Hardware Installation

· Connect Ethernet cable for PoE switches, routers and access points.

· Plug USB WiFi Adapter directly into laptop or desktop USB port.

· Power on the device and wait for system automatic recognition.

3. Driver / Network Configuration

USB network adapters install driver if needed for full WiFi 6 / WiFi 6E / WiFi 7 performance.

For routers and AP, complete basic WiFi name and password settings via browser management page.

4. Mesh / PoE Deployment

Enable Mesh roaming for whole-home and multi-room seamless WiFi coverage.

PoE devices transmit data and power with one single Ethernet cable for easy deployment.

5. Quick Troubleshooting

· No network signal: Check cable connection and device power status.

· Slow WiFi speed: Adjust position, keep away interference and connect proper 2.4GHz/5GHz/6GHz band.

· Device not recognized: Re-plug USB port or reinstall network driver.

Wavotec Networking Solution FAQ

1. What WiFi standards do Wavotec networking products support?

Wavotec wireless networking devices support mainstream WiFi 5, WiFi 6, WiFi 6E and latest WiFi 7 technology, covering 2.4GHz, 5GHz and 6GHz tri-band for faster speed and wider coverage.

2. Is the Mesh Router compatible with existing brand routers?

Yes. Wavotec Mesh Router and WiFi Extender work well with most mainstream brand routers, supporting seamless network expansion without replacing your original gateway.

3. What is the difference between Access Point and WiFi Router?

Access Point focuses purely on wireless signal coverage and network access, mainly for enterprise ceiling or wall-mounted deployment; Router provides routing, distribution and WiFi function all-in-one for home and office use.

4. Are USB WiFi Adapters plug-and-play?

Most Wavotec USB WiFi Adapter models support plug-and-play on mainstream systems, with driver version available for extended compatibility and stable high-speed wireless connection.

5. What devices can PoE switches and adapters supply power to?

Wavotec PoE series can supply power and data transmission simultaneously for Wireless AP, IP camera, network display and other standard PoE terminal devices, simplifying on-site wiring.

6. Is PoE deployment safe for long-distance wiring?

All PoE products follow standard protocol with built-in over-current, over-voltage and short-circuit protection, stable and safe for campus, hotel, office and surveillance long-distance networking.

7. Are networking products compatible with Windows and macOS?

Yes. The full networking lineup is widely compatible with Windows, macOS, Android and Linux systems, suitable for laptops, desktops and smart terminal network access.

Wavotec Audio Visual Solutions Technical Overview

1. Solution Ecosystem Introduction

Wavotec Audio Visual Solutions cover mainstream presentation, audio capture and video transmission devices, including Wireless Lavalier Microphone, HDMI Transmission Kit and Wireless Presenter.

The full series serves business presentation, live streaming, conference room AV deployment, outdoor recording and long-distance video signal extension scenarios, compatible with mainstream Windows and macOS systems.

2. Wireless Lavalier Microphone Technology

Adopted stable 2.4GHz wireless transmission technology, supporting low-latency audio pickup and real-time voice synchronization.

· Built-in noise reduction algorithm for clear voice capture in noisy environments

· Plug-and-play design for smartphone, laptop and camera devices

· Long transmission distance, anti-interference performance for live streaming and interview recording

3. HDMI Transmission Kit Technology

HDMI Transmission Kit supports stable 4K@30Hz / 1080P@60Hz video signal transmission, adopting lossless signal compression and extension technology.

· Long-range wired/wireless HDMI signal extension without signal attenuation

· Compatible with HDMI 1.4/2.0 standard, plug-and-play for projector, TV and conference display

· Support one-transmitter multi-receiver deployment for commercial conference and exhibition scenarios

4. Wireless Presenter Technology

Wireless Presenter applies RF 2.4GHz wireless control technology, delivering stable remote control within effective distance.

· Support PPT page up/down, full screen and black screen shortcut control

· Mini portable design, plug-and-play USB receiver without extra driver

· Widely adapted to Office presentation, classroom teaching and business conference occasions

5. Compatibility / Application Scenarios

All Wavotec AV devices maintain wide compatibility with Windows, macOS, Android and Linux systems, supporting mainstream laptops, smartphones, projectors and display terminals.

Suitable for business presentation, online live streaming, interview shooting, classroom education, office conference and exhibition hall audio visual layout.

Wavotec Audio Visual Solution Setup Guide

1. Preparations Before Setup

Prepare Wireless Lavalier Microphone, HDMI Transmission Kit or Wireless Presenter and related connecting cables.

Make sure your laptop, camera or display device works normally before connection.

2. Device Connection / Pairing

· Plug the wireless receiver into laptop, phone or camera USB / Type-C port.

· Power on microphone or wireless presenter for automatic 2.4GHz wireless pairing.

· Connect HDMI cable for video transmission kit between source and display device.

3. Basic Operation Steps

All AV devices are plug-and-play, no driver required for daily use.

Adjust audio input source or HDMI signal source on your system manually if needed.

4. Usage Scenario Tips

Keep wireless devices within effective transmission distance for stable signal.

Avoid strong signal interference area during meeting, live streaming and recording.

5. Quick Troubleshooting

· No sound or no signal: Re-pair wireless device or re-plug HDMI/USB port.

· Signal unstable: Shorten distance and stay away from WiFi and Bluetooth interference.

· Function not working: Restart device and reconnect again.

Wavotec Audio Visual Solution FAQ

1. What devices are included in Wavotec Audio Visual Solution?

Wavotec AV product lineup covers Wireless Lavalier Microphone, HDMI Transmission Kit and Wireless Presenter, suitable for conference presentation, live streaming, video recording and signal extension scenarios.

2. Is the wireless lavalier microphone plug-and-play?

Yes. It adopts 2.4GHz wireless transmission design, no driver required, plug-and-play for smartphones, laptops, cameras and most mainstream recording devices.

3. Does the HDMI Transmission Kit support 4K video?

The HDMI Transmission Kit is compatible with HDMI 1.4 / 2.0 standard, supporting 4K@30Hz and 1080P@60Hz stable transmission, ideal for projector, TV and conference display signal extension.

4. What is the effective control distance of the Wireless Presenter?

Adopting 2.4GHz RF wireless technology, the wireless presenter provides stable long-distance control, supporting PPT page turning, full screen and black screen functions for teaching and business meetings.

5. Are AV products compatible with Windows and macOS?

All audio visual devices are widely compatible with Windows and macOS systems, also supporting Android and Linux, no extra software installation needed for daily use.

6. Does the wireless microphone have noise reduction function?

Built-in intelligent noise reduction algorithm, effectively suppress background ambient noise, capture clear human voice, perfect for live streaming, interviews and outdoor shooting.

7. Can HDMI Transmission Kit be used for long-distance wiring?

Yes. It supports lossless video signal extension, avoids signal attenuation over long distance, and can be deployed in exhibition halls, office meeting rooms and commercial AV layout projects.